Applications of translucent platinum rtv silicone for culture stone
Liquid platinum rtv silicone for culture stone concrete molds could
be mainly used for making concrete stones, precision molds, PU
molds, resin molds, gypsum casting, candle molding,for life
casting, fabric finishing, seal for electronic components and solar
circuit board, trademark decoration. etc.
Descriptions of translucent platinum rtv silicone for culture stone
liquid platinum rtv silicone for culture stone concrete molds is
generally named two-components silicone rubber, Part A and part B.
It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making molds
OPERRATING INSTRUCTION of translucent platinum rtv silicone for
culture stone molds :
1. Stir part A and part B with right mixing ratio (1:1) evenly. And
get the mixture for vacuum-pumping. (If there is no vacuumizer, you
can just pour the mixture slowly from the corner so that less
2. Enclose the product (the original model) with four plastic
plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent
or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the
original model, and there you get a finished addition cured
silicone mold .
Twelve (12) months from date of shipment when stored at 24°C in
original unopened packages.